Bore Laser Alignment System L-705 / L-706

Bore Laser Alignment System L-705 / L-706 The L-705/ L-706 laser systems are highly accurate, easy-to-use bore alignment lasers that can be used for virtually any bore alignment application. Bores ranging from 1.5" ( 38.1 mm) to 36" ( 914 mm) or more can easily be accommodated. The L-705 is used for bore alignments out to 50 feet ( 15 M) and the L-706 is used from 50 to 110 feet ( 15 M to 33.5 M) . Both lasers feature battery operation and micrometer-controlled angular adjustments, and both lasers are centered to their housings to within .0005" ( .013 mm) . Our competitively priced L-705 Laser Borescope system is the fastest and most accurate extruder alignment system on the market. Its patented self-centering target and simple laser fixture are so easy to use you can have misalignment data in less than 10 minutes, including setup! The L-705 Turbine Alignment System has been designed to be very similar to tight-wire alignments but without the limitations and problems of using the wire. Its simple setup and fast data taking mean timesavings of 50% or more are very common. Other applications include: bore straightness, general bore alignment, hinge line alignment, boring-bar bearing alignment and many more. The Leader in Laser Bore Alignment Technology Hamar Laser manufactures the most accurate, versatile and portable bore alignment laser systems available: The L-705 and L-706. Both systems feature a multitude of options, including self-centering, see-through, 2-axis and 4-axis targets, hand-held readouts, and Windows-based software to display and analyze alignment data in real time. L-705 and L-706 Bore Alignment Lasers can be used for a variety of bore alignment and measurement applications: extruder barrels, engine blocks, stern tubes, turbines, and many more. Results 3x Faster Than Optical Bore Scopes or Tight Wire With Hamar, alignment of bores and extruder barrels is fast and easy: Setup takes 10 to 15 minutes, and overall alignments are done up to 3x faster than with optical bore scopes or tight wire. Because alignment data is real time, misaligned bores can be brought into tolerance very quickly. A 10' ( 3 m) bore can be measured for straightness every foot ( 300 mm) in under 10 minutes! Self-Centering Target Adapters Reduces Setup time by 90% With conventional bore alignment methods, the measuring device is typically mounted outside the bores, and targets are used in reference bores to align the measurement system — a very cumbersome process that can easily take an hour, or more.With Hamar' s patented, self-centering target adapter technology, the setup process is simple: laser and target are mounted directly into the reference bores, reducing setup time to just minutes rather than hours. More Accurate and Repeatable Measurements Than Optics With optics, the measurement process can be more of an “ art” than a science, since one operator will “ see” a different set of values than another. The L-705 uses sophisticated electronic sensors to detect the laser and thus offers greater accuracy and repeatability. Extend Component Life, Reduce Downtime Misaligned extruder bores, for example, cause screws and barrels to wear out faster requiring frequent replacement, more downtime, andhigher maintenance costs. Regular measurement of barrel-to-gearbox parallelism, straightness and barrel wear allows users to monitor alignment conditions and prevent big problems — before they occur. After laser alignment, customers tell us barrels and screws last up to 3x longer! Micrometer-Controlled Angular Adjustment Micrometers provide precise angular pointing control over the visible laser beam as it projects through the reference bores during alignment. By adjusting them, the user can steer the beam concentric to the second reference bore. Self-Centering Laser and Target Bore Adapter Hubs Our patented self-centering laser and target bore adapters accurately and quickly position the laser and targe on the bore centerline. Small Bore Adapter Hubs are used for bores from2" ( 50 mm) to 5" ( 125 mm) . Large Bore Adapter Hubs are used for bores from 5" ( 125 mm) to 40" + ( 1 m) . Customized Target Adapter Legs Self-centering laser and target adapter hubs have replaceable “ legs” that allow hubs to be used for diameters ranging from 2" ( 37 mm) to 40" ( 1 m) . Tell us the diameter you need, and we' ll supply a set of custom “ legs” to match. Visible Beam Light A low power, visible-light laser beam makes coarse alignment easy. No viewing devices are required for operation. Compact, Rugged, Portable Design Lasers are built of durable materials which are hardened to withstand a factory floor environment. Both the L-705 and L-706 lasers are light-weight ( 1.2 lbs.) and portable. They can even be stored as carry-on luggage in an airplane! T-218 Two-Axis Universal Target for Very Large, Half or Rough Bores For bores over 1 meter, half-bores, or where bore surfaces are worn or rough, the T-218 Two-Axis Universal Target and T-225L Large Bore Flange are used. The T-218 has a prism that flips out of the way, allowing the laser beam to pass unobstructed through the target without removing it — a useful feature when aligning multiple bores over long distances. For half-bores, the T-218 is used with our A-502A Half-Bore and A-501A Bore Sweep Fixtures to center it in the bore. Long Range, High Accuracy The L-705 has built-in micrometers which are used to adjust the laser beam to .001" in 50 feet ( 0.025 mm in 15 m) , although it can be used out to 110' ( 33 m) . The beam is straight to .00001" / ft or 0.0008 mm/ m — is 110' ( 33 m) . The L-706 — For Long-Distance Measuring With finer angular adjustment, the L-706 is designed for use in long-distance applications, i.e. from 45 feet ( 14 m) to 110 feet ( 33 m) . The laser beam can be adjusted to .001" in 100' ( 0.025 mm in 30 m) . Laser Beam Concentric to Mounting OD The L-705 laser beam is concentric to its mounting surfaces ( ODs) to 0.0005" ( 0.013 mm) , and has two mounting OD options: .750" ( 19.05 mm) and 2.25" ( 57.15 mm) . Powerful magnets hold the laser flush to the mounting surface. Optional Computer Upgrade Data can be Collected and displayed in real time with optional laptop upgrade. Laser digital indicator, Digital Dial indicator, Alignment laser, shaft alignment system, spindle alignment system, bore alignment system, geometric alignment, kerataan sumbu saat instalasi mesin, kesejajaran, kerataan jasa alignment lubang, alignment shaft, Roll Aignment, Power Generation, Auto Industry, Fabrication, Machine Tools, Aerospace, Plastic Processing, Plastic Products, Geomatric Alignment. Distributor agent penjualan training service repair, upgrade dan perbaikan Distributor agent menjual service repair jasa perbaikan alat, upgrade perbaikan mesin balancing, repair perbaikan mesin balancing, rubber testing, laboratory equipment, universal testing machine, tensile test, metal detector, x-ray machine, conveyor metal detectors, metal detektor, conveyor weighing system, non destructive testing, eddy current testing, level transmitter, level sensor, level switch, data logger, orion, slope monitoring, alat ukur tanah, uji tanah, measurement and testing, thermocouple, proximity sensor, pressure switch, load cell, strain gauge, rotary encoder, oil analyzer, oil analysis, vibration level meter, sound level meter, rubber testing equipment, repair & upgrade Rheometer, repair & upgrade Mooney Viscometer, repair & upgrade Ozone Testing Chamber, repair & upgrade Carbon Black Dispersion, repair & upgrade Tensile Testing Machine, repair & upgrade UCAN, kalibrasi Rheometer, kalibrasi Mooney Viscometer, kalibrasi Ozone Testing Chamber, kalibrasi Carbon Black Dispersion, kalibrasi Tensile Testing Machine, kalibrasi UCAN, maintenance Rheometer, maintenance Mooney Viscometer, maintenance Ozone Testing Chamber, maintenance Carbon Black Dispersion, maintenance Tensile Testing Machine, maintenance UCAN, Rheometer, Mooney Viscometer, Ozone Testing Chamber, Carbon Black Dispersion, Tensile Testing Machine, Machine protection, Online condition monitoring, Reciprocating compressor, Reciprocating pump, condition monitoring systems, Prognost Indonesia, Robert Shaw switch, windrock, Hoerbiger, Maintenance reciprocating compressor, Cara terbaik memproteksi mesin , Level Measurement, Level Control, Level Monitoring, ukur level, tank level, control system, temperature control, remote monitoring, monitoring system, Borescope, soil test, soil testing equipment, condition monitoring, safety protection reciprocating compressor, Noise analyzer, vibration analyzer, upgrade mesin uji, upgrade alat uji, upgrade testing machine, perbaikan alat uji, Shore hardness tester, IRHD hardness tester, VLRH hardness tester, Barcol hardness tester, Pusey & Jones hardness tester, Vickers hardness tester, Rockwell hardness tester, Plastic hardness tester, Sensors Displacement, sensors distance and position, sensors Laser Scanner, sensors Optical micrometers, sensors Infrared Temperature, sensors Custom designed, sensors Speed and length, sensor warna, dst. Jakarta - Indonesia Phone : 021-29563045 ( hunting) Hp : 08156141954 Pin BB : 284152F7