L-700/ L-701 SPINDLE LASER

L-700/ L-701 SPINDLE LASER Descriptions: The L-700/ L-701 are Class II diode lasers designed primarily for alignment of spindles to sub spindles or tailstocks. They has 4 axes of adjustment to align the laser beam to be co-linear and concentric to the center of its mounting stud or the axis of rotation of a spindle in which the unit is mounted. The L-700 is typically used in applications up to 30 feet ( 9.1 M) , although the laser can be used out to 100' ( 30.5 M) . The L-701 has 3 times finer angular adjustments to allow it to be aligned to reference targets up to 100 feet ( 30.5 M) away. Built-in levels on the top and bottom provide easy indexing when inverting for error correction readings. Other features include a shutter to protect the optics and an LED to indicate when the beam is on. Power is provided to the laser by a standard 9V battery for up to 8 hours of operation. The unit comes with a 0.5" ( 12.7 mm) mounting stud that simplifies fixturing and can be removed to adapt the unit to custom fixtures or other alignment applications. It can be used with the L-111 Laser stand for non-spindle applications. Applications: • Headstock spindle alignment to sub spindles or tailstocks • Transfer-line spindle alignment to master parts • Rotary dial machines • Boring bars • Turning applications ( cylindrical, OD/ ID grinders, lathes) • Twin-barrel extruders Features: • Mounts in the spindle to project its axis of rotation, allowing even the largest transfer line machines to be aligned quickly and effortlessly. • Vertical and horizontal controls on the front for both angle and center for fine-adjustment of laser to spindle axis of rotation. • T-261A 4-Axis Target provide live measurement data in 4 axes simultaneously ( vertical and horizontal angle and center) . • Simple fixturing for mounting the laser and target. • Visible-light beam aids setup. • Runs for up to 8 hours on a standard, replaceable 9-volt battery. • Compact and rugged. Specefications: Weight: 18 oz. ( 510 g) Material: Aluminum + Stainless Steel Standard Mount: .500" ( 12.7 mm) diameter mounting stud - can be replaced. 440C stainless steel, RC54-58 hardness Laser: CLASS II, < 1 mw, 6 mm diameter Power: 9-volt battery Laser Adjustment Range: L-700 up to 30' ( 9 meters) measurements can be taken to 100' . Beam Alignment Capability Adjustment Range: 0001" ( .013mm) Center..0001" / ft( .042mm/ m) Angle. Beam Stability: Center: .0001" / hr/ º F ( .002mm/ hr/ º C) Angular: .0001" / ft/ hr/ º F ( .005mm/ M/ hr/ º C) . .0001" / ft ( .042mm/ m) Angle. Adjustment Resolution: .0001" ( .0025 mm) Center. L-700: .0001" / ft ( .008 mm/ M) Angle L-701: .00003” / ft ( 0.0028 mm/ M) Angle Beam Adjustment Resolution: + / -.010" ( .25 mm) Center. L-700: + / -0.25 degrees angle. L-701: + / -0.01 degrees angle. Laser digital indicator, Digital Dial indicator, Alignment laser, shaft alignment system, spindle alignment system, bore alignment system, geometric alignment, kerataan sumbu saat instalasi mesin, kesejajaran, kerataan jasa alignment lubang, alignment shaft, Roll Aignment, Power Generation, Auto Industry, Fabrication, Machine Tools, Aerospace, Plastic Processing, Plastic Products, Geomatric Alignment. Distributor agent penjualan training service repair, upgrade dan perbaikan Jakarta - Indonesia TELP. 8611444 ( hunting) Call : 0815 614 1954, 0813 992 919 09, 0811 893 101